Our Draperies are expertly handcrafted from an extensive collection of exclusive fabrics. Available in several graceful designs, Drapes can be further customized with lining options. Linings help dramatically improve insulation for optimal energy-efficiency and privacy. Also available in these fabrics: Roman Shades, Valances, Board Mounted Valances and Upholstered Cornice Boards.

Panels come in 7 widths: 50", 75", 100", 125", 150", 175" and 200". Please pick one of these widths and use the chart below to determine the size of the panels you need to cover your window/patio door.

• Prices for all Drapery Panels include a single panel, for a a pair of drapes you will need to order 2 panels.
• First determine the panel width and number of panels needed to cover the window width.
• Our sizing solutions recommendations allow for a minimum of 2.5" : 1 fullness
• Grommets offered in 3 finishes, Size of outer diameter: 2.5", size of inner diameter 1.5".
• Only rods and poles 1¼” diameter and less can be used to hang these grommet panels.
• Final length is from top inside diameter to bottom.
• Bottom hem is 4"
• Side hems are 1 1/2"

Number of Panels Recommended:

If your window Measures up to:
30"- 40"W - recommend 2 panels at 50"w
41"- 60"W - recommend 2 panels at 75"w
61" - 80"W - recommend 2 panels at 100"w
81" - 100"W - recommend 2 panels at 125"w
101" - 120"W - recommend 2 panels at 150"w
121" - 140"W - recommend 2 panels at 175"w
141" - 160"W - recommend 2 panels at 200"w


Measurement Information/Considerations:
• Measure the width of the window area you would like to cover.
• Take time to plan your installation and get the measurements correct.
• We recommend adding an additional 4”- 6” to each side from the edge of the window glass. This allows the drapery panels, when pulled to their sides, to clear the window allowing more natural light in. It also prevents light gaps at edge of window.
• Consider the basic or decorative hardware you’ll be using to hang the panels from.
• Finials add another 6” - 8” (3”- 4” for each finial on both ends of the pole) to the total space of window/wall area you will need.
• For grommet panels, the finished panel length is measured from top inside of the grommet to bottom of the panel.
• The finished panel length you provide to the 1/2” will be the exact measurement the drapery panel will be made to.
• Special consideration should be given to the additional length gained by hanging the panels from decorative poles & rings.

Drapery Panel Length Advice:
• You can specify any length desired to the 1/2”
• Floor Length panels should be 1/2” above the floor for easy operation.
• Puddle Length panels should have another 6”-10” of length to pool the fabric on the floor; this length is not recommend for high traffic areas or drapery that needs to be opened and closed often.
• It is recommended to mount the pole approximately 4” above the window frame.