Show your school spirit with Collegiate Collection Roller Shades featuring the official logos and mascots from leading colleges and universities!
The Collegiate Collection Roller Shades are perfect for bedrooms and dorms, man caves and media rooms.
Roller Shades are built with white hardware. The Bottom rails are fabric-wrapped to match your shade. Choose from light filtering or blackout fabrics. Choose a standard roller or the Cassette Head Rail for a completely tailored. Roller Shades are custom-sized to your window and are printed "on-demand" so the logo is always the same proportion regardless of the shade size for a perfect fit!
The brackets are mounted on each end of the roller so the material starts a little ways in from the end leaving a gap down both sides of the fabric this is most noticeable when ordering as an inside mount shade. This gap will let light into the room. If this is an issue you may want to do draperies or side panels that will cover the sides of the roller shades. Or simply order as an outside mount to fully cover the window opening. The roller shades come with a clutch lift mechanism making them very easy to lift and lower and making them easy to stop at whatever height you want unlike the spring roller shades that are very hard to adjust.
Continuous Loop Cord Lift comes standard.
Standard Roll or Reverse Roll.
NOTE: These have rather large deductions to fabric width.
Mounting Hardware & Install Screws are included with most products.
Lifetime warranty against defects in parts and workmanship.
Free UPS ground shipping on all orders.
Minimum Width 12"
Minimum Height 12"
Maximum Width 72"
Maximum Height 84"
Approx. Control and Fabric Deductions (see chart below)
Max Fabric Width: 72"
Minimum Inside Mount Depth 1 1/4"
Minimum Inside Mount Depth 1 3/4"
Minimum Inside Mount Depth (fully recessed) 3"
Minimum Inside Mount Depth 4"
Minimum Outside Mounting Surface 2"
Outside Mount the width is the fabric/barrel width not tip to tip
Roller Shades Stack Height:
The stack height varies based on the size of the roller shade. The wider/longer the shade the bigger the roll will be when the shade is in the up position. Larger sized shades also require a thicker the tube to support the shade. We can only estimate the stack sizes for customer inquiries. The normal estimation is anywhere from 2-5 inches.
Roller Shade Width Deductions Production Deductions taken by Factory 1" Metal Roller - 14" to 71 7/8" width (Tip to Tip 1/4", Barrel 1 1/8", Fabric 1 1/8") 1 3/8" Metal Roller - 72" and greater width (Tip to Tip 1/4", Barrel 1 1/8", Fabric 1 1/8")