Quick Overview
Our Fabric Roller Shades have a sleek, minimal and modern look. Custom made to your specifications, using the finest materials available, the shades are available in light filtering and blackout fabrics. Shades are made with our premium Ez Lift continuous loop control system, a beaded chain that allows you to roll the shade up and down easily and precisely. A motorized control is optional.
Features:
Ez Lift Continuous Chain Loop standard
Motorization is optional for shades up to 96"w or 120"h
Minimal Mounting Space required (see below for details)
Several Valance options available.
Standard Hem, with 2 optional upgrades.
NOTE: These have rather large deductions to fabric width. See specs tab below for details.
Mounting Hardware & Install Screws are included with most products.
Warranty against defects in parts and workmanship.
Free UPS ground shipping on all orders.
Product Specifications:
Minimum Width: 6"
Maximum Width: 144"
Minimum Height: 12"
Maximum Height: 120"
Depth Requirements:
Shade width up to 72" / Shade Height up to 120":
Min. Depth 1/2", Inside Flush Mount 2 1/2", Outside Mount Surface 1 5/8"
Shade width 72" to 108" / Shade Height up to 120":
Min. Depth 5/8", Inside Flush Mount 3", Outside Mount Surface 2 1/2"
Shade width 108" to 132" / Shade Height up to 120":
Min. Depth 5/8", Inside Flush Mount 3", Outside Mount Surface 2 1/2"
Shade width 132" to 144" / Shade Height up to 120":
Min. Depth 5/8", Inside Flush Mount 4", Outside Mount Surface 2 1/2"
For Shades with the Cassette System:
Min. Depth 1 1/8", Inside Flush Mount 3 7/8", Outside Mount Surface 3 3/4"
For Shades with the 3" Fascia:
Min. Depth 7/8", Inside Flush Mount 3 3/4", Outside Mount Surface 3 1/8"
For Shades with the 4" Fascia:
Min. Depth 7/8", Inside Flush Mount 4 7/8", Outside Mount Surface 4 1/8"
For Shades with the Square Corner Valance:
Min. Depth 2", Inside Flush Mount 3 1/4" - up to 132"wide, 4 1/4" - 132" to 144"wide, Outside Mount Surface 1 1/2".
Motorization Specifications:
Minimum Width: 13"
Maximum Width: 168"
Maximum Height: 144'
Maximum Shade size: 96 sq ft. Call Customer Service for motorization pricing for shades 96 sq ft up to 168 sq ft.
Special Note:
Roller blinds (sheers, roller shades, sunscreens or any blind that rolls up), the fabric width is approximately 1” narrower than the roller on shades up to 108".
Roller blinds (sheers, roller shades, sunscreens or any blind that rolls up), the fabric width is approximately 1 1/8” to 1 1/4" narrower than the roller on shades over 108"w to 144".
The fabric rolls on a tube, the mounting mechanism is attached to the end of the tube/roller. Therefore the total measurement of the shade itself is wider than the fabric. It is industry standard that the width measurement for all roller shades includes the ENTIRE blind (including the mounting mechanism) - this is called the tip to tip measurement. The gap between the mechanisms and the fabric itself will be approximately 1" to 1 1/2". For inside the window mounts, you have to decide if the roller is the right window treatment for you. In cases where you are using drapes, this will not matter as they will cover the ends of the shade.
For outside mount shades, you do have a choice. You can ADD to the width of the roller to make the fabric any size you want. For example, if you need your fabric to be 35 inches wide. Simply add 1" (use list above and determine your fabric deduction depending on your width) to the width when you place your order. This includes the mechanisms and makes your fabric exactly at 35", but the total width of the shade would be 36”. Please feel free to call prior to placing an order if you need help.
